What size machine screws for the TT Combo?

Orange Amps Technical Q&A's

Moderator: bclaire

Post Reply
Boy_Narf
Orange Master
Posts: 2444
Joined: Fri Sep 05, 2008 6:27 am
Location: Canada
Contact:

What size machine screws for the TT Combo?

Post by Boy_Narf » Sat Apr 11, 2020 6:32 pm

Hi guys,

I picked up an old TT combo recently (serial end in 0810) and it's missing 2 machine screws (the ones that hold the head into the cabinet). Would anyone by chance know which size they are so I can order a few online?

Thanks,
TT | R30 | R30C | PPC212V

PedalTrain2 | Zuma

GLXD16 | Decimate | FlashBackMini | ST1 | TimeLine | BlueSky | RangIII | DMC3XL | EX-50

www.scratchbuffalo.com
www.soundcloud.com/modestnews

Boy_Narf
Orange Master
Posts: 2444
Joined: Fri Sep 05, 2008 6:27 am
Location: Canada
Contact:

Re: What size machine screws for the TT Combo?

Post by Boy_Narf » Sun Apr 12, 2020 4:16 pm

NVM braved the air and did it the old fashioned way. 10-32 X 1 1/2" is all they had (little short but still fit fine).
TT | R30 | R30C | PPC212V

PedalTrain2 | Zuma

GLXD16 | Decimate | FlashBackMini | ST1 | TimeLine | BlueSky | RangIII | DMC3XL | EX-50

www.scratchbuffalo.com
www.soundcloud.com/modestnews

Les Paul Lover
Duke of Orange
Posts: 6790
Joined: Tue Aug 18, 2009 9:08 am
Location: Derby, England

Re: What size machine screws for the TT Combo?

Post by Les Paul Lover » Thu Apr 23, 2020 8:49 pm

I can't remember of they are M5 or M6 screws.

All I know (I could do with new ones for my AD15) is that they're impossible to buy in less than 100s packs in the UK if you want them in black.
Ant

Orange Gear: RV50 MKI, R30, AD15, PPC212
And.... Genz Benz Black Pearl 30
Past Orange: AD30TC Combo, TT, AD5


Guitars: Gibson Les Paul Standard Faded, Vigier Expert Retro 54, Gibson SG 70s Tribute, Aria Pro II RS X80, G&L ASAT Special Tribute

Boy_Narf
Orange Master
Posts: 2444
Joined: Fri Sep 05, 2008 6:27 am
Location: Canada
Contact:

Re: What size machine screws for the TT Combo?

Post by Boy_Narf » Thu Apr 23, 2020 8:51 pm

Silver screws and Sharpe 🤣
TT | R30 | R30C | PPC212V

PedalTrain2 | Zuma

GLXD16 | Decimate | FlashBackMini | ST1 | TimeLine | BlueSky | RangIII | DMC3XL | EX-50

www.scratchbuffalo.com
www.soundcloud.com/modestnews

Les Paul Lover
Duke of Orange
Posts: 6790
Joined: Tue Aug 18, 2009 9:08 am
Location: Derby, England

Re: What size machine screws for the TT Combo?

Post by Les Paul Lover » Sat May 02, 2020 8:09 am

Boy_Narf wrote:
Thu Apr 23, 2020 8:51 pm
Silver screws and Sharpe 🤣
Probably the best bet! Frustrating though. Ideally, I would need 4 short and 4 long ones for my AD15 as the PZ screw heads are worn. But I've been reluctant to both buy regular silver looking steel screws in modest quantities or to buy a truck load of black screws.

I've even contacted Orange, but they wouldn't entertain replying to me despite a couple of chasers........ :(
Ant

Orange Gear: RV50 MKI, R30, AD15, PPC212
And.... Genz Benz Black Pearl 30
Past Orange: AD30TC Combo, TT, AD5


Guitars: Gibson Les Paul Standard Faded, Vigier Expert Retro 54, Gibson SG 70s Tribute, Aria Pro II RS X80, G&L ASAT Special Tribute

Post Reply

Who is online

Users browsing this forum: Bing [Bot] and 3 guests