Orange Amps Technical Q&A's
5 posts • Page 1 of 1
Any feedback for me on this? I have some issues with pedals in my effects loop whether using the dirty or clean channel but less so when plugged into the front. Basically most of my pedals sound great and “normal” on other amps but on this head they sound overly distorted and like there is a pulsing sound if on the effects loop. If plugged into the main input they’re better but dull and not very lively. Any thoughts?
Are you plugging your guitar straight in to the pedals and then in the effects loop return, or plugging into the amp input and putting the distortion pedals in the loop? Generally distortion pedals don't sound good in the loop with the amps pre-amp feeding into them. Not all amps handle peals well either, I'm somewhat familiar with the design of that amp, but not that amp specifically. It's similar to a Rocker but with some differences in the frequencies, which could really affect how well it takes pedals. ON the Rocker I find it handles distortion pedals well in front if the gain on the dirty channel is kept fairly clean. The Natural channel really depends on the pedal.
Yeah I guess I wasn’t very specific. I try to follow the rule that the guitar goes into a tuner then wah then fuzz/distortion/od the amp input. The loop is reserved for delay, chorus, echo, flanger, etc.
Nothing in my loop sounds good.
Who is online
Users browsing this forum: No registered users and 1 guest