Orange Amps Tube Layout Guide
Moderator: bclaire
-
- New Member
- Posts: 6
- Joined: Fri Nov 01, 2019 3:58 pm
Re: Orange Amps Tube Layout Guide
The manual has the tube layout but unfortunately doesn't state which tube is V1, V2, PI etc. I emailed Orange about it but am still waiting for a response. I'll post it here as soon as I get a response.
Re: Orange Amps Tube Layout Guide
With a pic of the board, might be able to decipher
Re: Orange Amps Tube Layout Guide
V1 will be the closest to the input. V2 will be next to that. The PI will probably be located in front of those tubes.V1 is gain, V2 powers the tremelo, the 2 12at7s are for the loop and reverb, the last one is the PI. You should be able to suss it out pretty easily.
-
- New Member
- Posts: 6
- Joined: Fri Nov 01, 2019 3:58 pm
Re: Orange Amps Tube Layout Guide
Intuitively I figured it would be closest to the input. I'll have to pull the chassis out tomorrow and take a pic but this is from the manual.
-
- New Member
- Posts: 6
- Joined: Fri Nov 01, 2019 3:58 pm
Re: Orange Amps Tube Layout Guide
Just decided to go ahead and take it out.
Re: Orange Amps Tube Layout Guide
Cool! I think you've got it covered at this point. BTW, I got my info from the Orange site, so it should be spot on.
-
- New Member
- Posts: 6
- Joined: Fri Nov 01, 2019 3:58 pm
Re: Orange Amps Tube Layout Guide
Thanks for the help all, It's appreciated!1
Best,
Justin
Best,
Justin
Who is online
Users browsing this forum: No registered users and 31 guests