It's an oversized 55cm(w) x 45cm (H) x 35cm (D) cab, constructed from 18mm baltic birch ply. All construction is made with rebate corners, similar to how an acoustic guitar goes together. Wrapped in a nice heavy Orange Style black vintage basketweave. finished with black hardware, including flight case style handles.
The amp slides into a custom tray made from 1mm steel (laser cut and bent), custom 3d printed runners and some foam gaskets proide a snug and vibration free fit, and the cutaways provide good ventilation througout. The amp handle is replaced with a "folding" design that allows it to stow away behnid the panel in a small route.
The functionality of the Amp is maintained with a pass-through plate on the back for power and the FX loop. You can also un-dock the amp and then connect the speaker to one of the FX loop input jacks with a male-to-male adapter to allow the cab to be used stand-alone as a quite unconventional "open back" design.
It really sounded great, both with a Celestion G12T-75 and a WGS G12c/s (which happened to also be orange coloured. I was quite heart-broken to see this one go out the door, and will definitely make one for myself one day.
Appreciate any feedback and ideas on how to improve the next one.
![Image](https://i.imgur.com/dBKMMML.jpg?1)
Link to more photos and some of the build:
https://imgur.com/gallery/Zf6MH98
and
https://imgur.com/a/lchq5hG