Orange TH 30 switch on issues

Orange Amps Technical Q&A's

Moderator: bclaire

Post Reply
blashyrkh
New Member
Posts: 2
Joined: Sun Nov 04, 2018 7:54 pm

Orange TH 30 switch on issues

Post by blashyrkh » Sun Nov 04, 2018 8:02 pm

I have a Orange TH 30 at home. So my amp is switch off at the moment, in stand-by mode and is also on the clean channel. But I switch it on and set it on half or full mode after about 30 seconds, you hear the distorted channel very silently... I switch it to the distorted channel, back to clean and then it works.

What could be wrong?

Thanks

blashyrkh
New Member
Posts: 2
Joined: Sun Nov 04, 2018 7:54 pm

Re: Orange TH 30 switch on issues

Post by blashyrkh » Sun Jan 13, 2019 9:11 pm

I’ve already cleaned out my pots, But still the same issue.

Here is a video of my issue: https://youtu.be/CmVjDRRwnQM

robbvant
New Member
Posts: 27
Joined: Thu Jan 11, 2018 10:01 pm

Re: Orange TH 30 switch on issues

Post by robbvant » Fri Feb 01, 2019 6:48 am

do you have a foot switch to use on the amp. maybe if you plug one of them in you can put it back in the proper cycle.

steavejoves
New Member
Posts: 1
Joined: Mon Feb 04, 2019 10:00 am

Re: Orange TH 30 switch on issues

Post by steavejoves » Mon Feb 04, 2019 10:08 am

We are using good information and which is really helpful for us. And I use the printer and if I have an error with printer then go to the Epson error code 0xe5 to solve the problem. which provide a good service.

Post Reply

Who is online

Users browsing this forum: Baidu [Spider] and 3 guests