Faceplate dimensions?

Orange Amps General Forum

Moderator: bclaire

Post Reply
Jondog
Duke of Orange
Posts: 7234
Joined: Thu Aug 21, 2008 12:16 pm
Location: Ontario, Canada

Faceplate dimensions?

Post by Jondog » Thu Apr 23, 2015 10:00 pm

Wondering if anyone could measure up the width and height of the Orange head faceplate for me? :) a rockerverb, rocker, or ad30 etc.. Thanks
Image

Randy Bass
Lord of Orange
Posts: 10149
Joined: Tue Sep 29, 2009 3:44 am

Re: Faceplate dimensions?

Post by Randy Bass » Thu Apr 23, 2015 10:26 pm

I got 19" W x 7" H on the OR50. That's 133 square inches of sexiglas. 8)
_________________
Image

Jondog
Duke of Orange
Posts: 7234
Joined: Thu Aug 21, 2008 12:16 pm
Location: Ontario, Canada

Re: Faceplate dimensions?

Post by Jondog » Thu Apr 23, 2015 11:21 pm

Awesome thanks! I knew it was 19 but couldn't remember if it was 7 or 7.5 high.





looks right to me!
Image
Image

Randy Bass
Lord of Orange
Posts: 10149
Joined: Tue Sep 29, 2009 3:44 am

Re: Faceplate dimensions?

Post by Randy Bass » Fri Apr 24, 2015 11:08 pm

Wow. That looks like a serious project going on there. Is it Rocker 30ish?
_________________
Image

Jondog
Duke of Orange
Posts: 7234
Joined: Thu Aug 21, 2008 12:16 pm
Location: Ontario, Canada

Re: Faceplate dimensions?

Post by Jondog » Fri Apr 24, 2015 11:16 pm

Randy Bass wrote:Wow. That looks like a serious project going on there. Is it Rocker 30ish?
30ish, but not Rockerish.
Image

steamboat
Rocker
Posts: 269
Joined: Fri Jan 06, 2012 12:28 am

Re: Faceplate dimensions?

Post by steamboat » Fri Apr 24, 2015 11:26 pm

Good ole ad30 twin channel....what r you doing with that? :D
Rollin with a fat sack of Oranges

Randy Bass
Lord of Orange
Posts: 10149
Joined: Tue Sep 29, 2009 3:44 am

Re: Faceplate dimensions?

Post by Randy Bass » Fri Apr 24, 2015 11:28 pm

I see a single-channel amp with MV, TMB, and Gain controls.
_________________
Image

Jondog
Duke of Orange
Posts: 7234
Joined: Thu Aug 21, 2008 12:16 pm
Location: Ontario, Canada

Re: Faceplate dimensions?

Post by Jondog » Fri Apr 24, 2015 11:37 pm

AD30 single channel. I punched a couple extra socket holes in case I decide to add a second channel one day. This all started because I was going to buy one from the local classifieds, but it sold before I could make an offer. So, I'm building one.....
Image

Bensnake
Orange Master
Posts: 2260
Joined: Thu Sep 05, 2013 8:36 am
Location: Sweden

Re: Faceplate dimensions?

Post by Bensnake » Sat Apr 25, 2015 12:03 am

Wonderful! :D
Image
RV100 MKIII | '75 OR120 | OR100 | OR50 | CS50 | R30H | TT
2 x PPC412
Bax B. | Amp D.

Marshall 1959 HW + 1936V
Fender '65 Super Reverb Reissue
Vox AC30C2X + V212C

Playing Les Pauls and Teles...

Jondog
Duke of Orange
Posts: 7234
Joined: Thu Aug 21, 2008 12:16 pm
Location: Ontario, Canada

Re: Faceplate dimensions?

Post by Jondog » Sat Apr 25, 2015 12:27 am

First amp I've made my own chassis for too :mrgreen: welded it all up, dressed the edges, solid!. Much cheaper than getting one made that's screwed together
Image

Post Reply

Who is online

Users browsing this forum: No registered users and 169 guests