Is this a mis-print?
Moderator: bclaire
-
- Orange Master
- Posts: 1315
- Joined: Mon Jul 09, 2007 4:41 pm
- Location: Baltimore, MD
- Contact:
<blockquote id="quote"><font size="1" face="Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote"><i>Originally posted by hamfist</i>
<br />For accuracy, I will mention that the RV50 has 4 x 6V6's not two.
<hr height="1" noshade id="quote"></font id="quote"></blockquote id="quote">
yea that too...
<br />For accuracy, I will mention that the RV50 has 4 x 6V6's not two.
<hr height="1" noshade id="quote"></font id="quote"></blockquote id="quote">
yea that too...
<blockquote id="quote"><font size="1" face="Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote"><i>Originally posted by PopnFresh</i>
<br />Erm isnt this because the 30 is class A, the 50 class A/B?
<hr height="1" noshade id="quote"></font id="quote"></blockquote id="quote">
good point !!!:oops:
<br />Erm isnt this because the 30 is class A, the 50 class A/B?
<hr height="1" noshade id="quote"></font id="quote"></blockquote id="quote">
good point !!!:oops:
-
- Orange Master
- Posts: 4435
- Joined: Tue Jul 11, 2006 5:46 pm
- Location: USA
<blockquote id="quote"><font size="1" face="Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote"><i>Originally posted by hamfist</i>
<br />For accuracy, I will mention that the RV50 has 4 x 6V6's not two.
<hr height="1" noshade id="quote"></font id="quote"></blockquote id="quote">
+1.
6V6 = best tube on the world IMO.
<br />For accuracy, I will mention that the RV50 has 4 x 6V6's not two.
<hr height="1" noshade id="quote"></font id="quote"></blockquote id="quote">
+1.
6V6 = best tube on the world IMO.
http://hypersoulrocks.com/index.html" onclick="window.open(this.href);return false;
http://www.myspace.com/lovea45" onclick="window.open(this.href);return false;
-
- Orange Master
- Posts: 3025
- Joined: Thu Mar 01, 2007 4:47 am
- Location: USA
<blockquote id="quote"><font size="1" face="Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote"><i>Originally posted by Borderline Productions</i>
The 6V6s are found only in a few amps.
<hr height="1" noshade id="quote"></font id="quote"></blockquote id="quote">
And those are typically great ones....
The 6V6s are found only in a few amps.
<hr height="1" noshade id="quote"></font id="quote"></blockquote id="quote">
And those are typically great ones....
Jimy...HM#5
--------------------
--------------------
<blockquote id="quote"><font size="1" face="Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote"><i>Originally posted by 77custom</i>
<br /><blockquote id="quote"><font size="1" face="Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote"><i>Originally posted by PopnFresh</i>
<br />Erm isnt this because the 30 is class A, the 50 class A/B?
<hr height="1" noshade id="quote"></font id="quote"></blockquote id="quote">
good point !!!:oops:
<hr height="1" noshade id="quote"></font id="quote"></blockquote id="quote">
Nope, the Rocker 30 isn't class A, it's A/B as it's got a phase inverter tube in it, thus the power tubes are in push pull config.
<br /><blockquote id="quote"><font size="1" face="Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote"><i>Originally posted by PopnFresh</i>
<br />Erm isnt this because the 30 is class A, the 50 class A/B?
<hr height="1" noshade id="quote"></font id="quote"></blockquote id="quote">
good point !!!:oops:
<hr height="1" noshade id="quote"></font id="quote"></blockquote id="quote">
Nope, the Rocker 30 isn't class A, it's A/B as it's got a phase inverter tube in it, thus the power tubes are in push pull config.
-
- Duke of Orange
- Posts: 9965
- Joined: Thu Jan 29, 2004 8:50 am
- Location: Amsterdam, Netherlands.
<blockquote id="quote"><font size="1" face="Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote"><i>Originally posted by 77custom</i>
<br />That seems wierd to me because the R30 uses EL34's (25 watts <b>max</b> disapation per tube)for 30 watts and 6V6's in the RV50 for 50 watts(12 watts <b>max</b> disapation per tube which equals 50 watts).
<hr height="1" noshade id="quote"></font id="quote"></blockquote id="quote">Those are <b>maxima</b>. Whether an amp will ever use that potential depends on a lot of other things than just the valves. Like the whole power amp circuit design basically. But you can run the valves at any power below that maximum you like!
http://www.thegearpage.net/board/showth ... p?t=149025
<blockquote id="quote"><font size="1" face="Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote"><i>Originally posted by 77custom</i>
The orange site states that the <b>Reverbrocker 50</b> has 2 6V6 for the output tubes.
<hr height="1" noshade id="quote"></font id="quote"></blockquote id="quote">
Was <i>that</i> a mis-print? [:p]
Andy.
<br />That seems wierd to me because the R30 uses EL34's (25 watts <b>max</b> disapation per tube)for 30 watts and 6V6's in the RV50 for 50 watts(12 watts <b>max</b> disapation per tube which equals 50 watts).
<hr height="1" noshade id="quote"></font id="quote"></blockquote id="quote">Those are <b>maxima</b>. Whether an amp will ever use that potential depends on a lot of other things than just the valves. Like the whole power amp circuit design basically. But you can run the valves at any power below that maximum you like!
http://www.thegearpage.net/board/showth ... p?t=149025
<blockquote id="quote"><font size="1" face="Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote"><i>Originally posted by 77custom</i>
The orange site states that the <b>Reverbrocker 50</b> has 2 6V6 for the output tubes.
<hr height="1" noshade id="quote"></font id="quote"></blockquote id="quote">
Was <i>that</i> a mis-print? [:p]
Andy.
Only dimly aware of existence, a dimly existing awareness...
You get a wonderful view from the point of no return.
You get a wonderful view from the point of no return.
-
- Duke of Orange
- Posts: 9965
- Joined: Thu Jan 29, 2004 8:50 am
- Location: Amsterdam, Netherlands.
<blockquote id="quote"><font size="1" face="Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote"><i>Originally posted by Neiloler</i>
<br />Nope, the Rocker 30 isn't class A, it's A/B as it's got a phase inverter tube in it, thus the power tubes are in push pull config.
<hr height="1" noshade id="quote"></font id="quote"></blockquote id="quote">The R.30 isn't class A, true enough. But that hasn't anything to do with it being a push pull amp. You <i>can</i> get push pull class A amps...
http://forum.orangeamps.com/viewtopic.p ... d,parallel
Andy.
<br />Nope, the Rocker 30 isn't class A, it's A/B as it's got a phase inverter tube in it, thus the power tubes are in push pull config.
<hr height="1" noshade id="quote"></font id="quote"></blockquote id="quote">The R.30 isn't class A, true enough. But that hasn't anything to do with it being a push pull amp. You <i>can</i> get push pull class A amps...
http://forum.orangeamps.com/viewtopic.p ... d,parallel
Andy.
Only dimly aware of existence, a dimly existing awareness...
You get a wonderful view from the point of no return.
You get a wonderful view from the point of no return.
<blockquote id="quote"><font size="1" face="Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote"><i>Originally posted by Andy H.</i>
<br /><blockquote id="quote"><font size="1" face="Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote"><i>Originally posted by Neiloler</i>
<br />Nope, the Rocker 30 isn't class A, it's A/B as it's got a phase inverter tube in it, thus the power tubes are in push pull config.
<hr height="1" noshade id="quote"></font id="quote"></blockquote id="quote">The R.30 isn't class A, true enough. But that hasn't anything to do with it being a push pull amp. You <i>can</i> get push pull class A amps...
http://forum.orangeamps.com/viewtopic.p ... d,parallel
Andy.
<hr height="1" noshade id="quote"></font id="quote"></blockquote id="quote">
Yeah, isnt it a push pull amp that has been biased to be class a to give it lots of nice crossover distorion, or is my brain failing me?
<br /><blockquote id="quote"><font size="1" face="Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote"><i>Originally posted by Neiloler</i>
<br />Nope, the Rocker 30 isn't class A, it's A/B as it's got a phase inverter tube in it, thus the power tubes are in push pull config.
<hr height="1" noshade id="quote"></font id="quote"></blockquote id="quote">The R.30 isn't class A, true enough. But that hasn't anything to do with it being a push pull amp. You <i>can</i> get push pull class A amps...
http://forum.orangeamps.com/viewtopic.p ... d,parallel
Andy.
<hr height="1" noshade id="quote"></font id="quote"></blockquote id="quote">
Yeah, isnt it a push pull amp that has been biased to be class a to give it lots of nice crossover distorion, or is my brain failing me?
Who is online
Users browsing this forum: No registered users and 332 guests