Page 1 of 1
Vintage Orange amp parts ?
Posted: Sun Feb 25, 2018 2:05 pm
by Ludivico
Looking for OR-120 ohmage plugs, back panel cover etc... If anybody knows ?
Thanks
Re: Vintage Orange amp parts ?
Posted: Sun Feb 25, 2018 4:45 pm
by bclaire
Welcome to the forum!
Ohm switches like that often turn up on eBay from time to time - that said, most people switch to a modern switch without the pull-out pins which can get loose, arc, etc. Not often, but often enough.
The back panels are tricky. They got removed when the amp was running very hot and often got lost. I think I would try to find someone (cabinet maker) to make a reproduction. There are lots of photos out there and you could measure your opening for a precise fit.
Re: Vintage Orange amp parts ?
Posted: Tue Feb 27, 2018 12:25 pm
by Ludivico
Thanks Bill... I appreciate the response. I scored a stock vintage Orange 6x12 cabinet off Craigslist recently, and I hope to restore the OR-120 to stock (or as close as possible) to pair them together.
Rock on !
Re: Vintage Orange amp parts ?
Posted: Tue Feb 27, 2018 2:22 pm
by bclaire
There are some things/mods that can be done that generally don't affect the value or vintage-ness of an amp if they're done for safety: impedance selector, for example, and grounded power cord.
Re: Vintage Orange amp parts ?
Posted: Tue Feb 27, 2018 2:26 pm
by bclaire
Ludivico wrote: ↑Tue Feb 27, 2018 12:25 pm
Thanks Bill... I appreciate the response. I scored a stock vintage Orange 6x12 cabinet off Craigslist recently, and I hope to restore the OR-120 to stock (or as close as possible) to pair them together.
Rock on !
Definitely need pix of the 6X12!
Re: Vintage Orange amp parts ?
Posted: Tue Mar 06, 2018 4:17 am
by Ludivico
Ba Da Boom ! Stock.
Re: Vintage Orange amp parts ?
Posted: Tue Mar 06, 2018 11:21 am
by bclaire
That's wild.... and huge! How freakin' heavy is that thing?
Re: Vintage Orange amp parts ?
Posted: Tue Mar 06, 2018 6:02 pm
by Gladmarr
Okay, now I’m gonna step in. Just to say OHMYGODOHMYGODOHMYGOD!!!! I haven’t seen even a pic of one of these in like 10 years!!
Re: Vintage Orange amp parts ?
Posted: Tue Mar 06, 2018 6:42 pm
by Ludivico
Re: Vintage Orange amp parts ?
Posted: Tue Mar 06, 2018 10:58 pm
by bclaire
Great pictures!
What does it say on the back for ohms? Those look like Eminence speakers...
Re: Vintage Orange amp parts ?
Posted: Wed Mar 07, 2018 2:10 am
by Ludivico
Ohm tag missing. Eminance Speakers dated 74. So cab is 74.
My tube amp guru expert buddy says those are period correct for Orange, and most likely factory installed.
Re: Vintage Orange amp parts ?
Posted: Wed Mar 07, 2018 11:14 am
by bclaire
Typically, Orange shipped cabs to the USA unloaded and then they were loaded with Eminence here.... my two 4X12's had the same speakers...
Re: Vintage Orange amp parts ?
Posted: Mon Mar 12, 2018 4:18 am
by Gladmarr
I’m betting that cab is 5.3 ohms.
Re: Vintage Orange amp parts ?
Posted: Mon Mar 12, 2018 11:57 am
by bclaire
Gladmarr wrote: ↑Mon Mar 12, 2018 4:18 am
I’m betting that cab is 5.3 ohms.
So...... what do you set the impedance at?
Re: Vintage Orange amp parts ?
Posted: Tue Mar 13, 2018 1:24 am
by Gladmarr
8 or 4. Whichever sounds better. 16 is too high.