Hello!
I bought an Orange 120 with some odd specs, and I would like to find out what year it was made. It is a late 70´s or120, thats about what I know.
The funny thing is that it got the old backside, looks just like this:
http://users.telenet.be/orangefg/OFG_OD ... bottom.jpg
And I mean just like that, with the swedish Musikbörsen-logo and the hardwired power chord.
But the front looks like this one, the OR120 Series II:
http://users.telenet.be/orangefg/OFG_OR ... Mfront.jpg
Every series II I have seen before has had the "modern" power chord which can be removed, and some other differences.
To make this post on topic, I will complete it with the serial number as soon as I get home from work.
Want to put a year on my OR120!
Moderator: bclaire
-
- Forum Moderator
- Posts: 17905
- Joined: Thu May 02, 2002 9:19 pm
- Location: Outside Boston MA, USA
- Contact:
Late 70's (meaning probably 1979 is as close as you're going to get. The different faceplates of the Series II were a 1979 feature as far as anyone has been able to determine so far.
Check for a date tag- this amp should have had one. As far as the specialized graphics on the back for that music store, that was probably a special deal/run for that store I would bet...
Check for a date tag- this amp should have had one. As far as the specialized graphics on the back for that music store, that was probably a special deal/run for that store I would bet...
-
- New Member
- Posts: 2
- Joined: Mon Nov 20, 2006 10:06 am
- Location: Sweden
Oh, fast reply, thanks!
I´m still wondering about the back of the amp, it´s got more similarities to the older OR120 than to other series II amps.
Were there some "fender-style" production lines going on, so specifications can vary between two amps that looks the same on the outside? If I was to take a look inside, could I see something else than the inspection tag?
Was series II always made on a PCB, and were older amps always ptp?
I´m still wondering about the back of the amp, it´s got more similarities to the older OR120 than to other series II amps.
Were there some "fender-style" production lines going on, so specifications can vary between two amps that looks the same on the outside? If I was to take a look inside, could I see something else than the inspection tag?
Was series II always made on a PCB, and were older amps always ptp?
-
- Forum Moderator
- Posts: 17905
- Joined: Thu May 02, 2002 9:19 pm
- Location: Outside Boston MA, USA
- Contact:
I'd look through www.orangefg.com and see what you can find...
Who is online
Users browsing this forum: No registered users and 35 guests