Is there somewhere where I can get an instruction manual for an Orange Slave Amp? My dad has had this amp for a long time and it's just a couple of months ago that we cleaned it up and had a tube replaced on it. It's just that the knobs on the back has the numbers worn away. Oh and it's missing the typical orange case, basically it's just the metal unit itself, so it doesn't look too close to pictures I've seen of it online. Any help would be great, possibly even where we could get the outer casing too.
Thanks,
Paul
you can email me too [email protected]
Orange Slave Amp
Moderator: bclaire
-
- New Member
- Posts: 38
- Joined: Mon Apr 29, 2002 10:01 am
- Location: Belgium
Pollenrocker,
The backpanel of a slave amp is to my knowledge identical or at least very close to that of old OR120s.
You can check some of the pictures at my site to check if the back your slave unit looks like the other backpanels.
Geert
http://www.geocities.com/geertjacobs/orange_page.htm
The backpanel of a slave amp is to my knowledge identical or at least very close to that of old OR120s.
You can check some of the pictures at my site to check if the back your slave unit looks like the other backpanels.
Geert
http://www.geocities.com/geertjacobs/orange_page.htm
Who is online
Users browsing this forum: No registered users and 140 guests