Page 1 of 1

What size machine screws for the TT Combo?

Posted: Sat Apr 11, 2020 6:32 pm
by Boy_Narf
Hi guys,

I picked up an old TT combo recently (serial end in 0810) and it's missing 2 machine screws (the ones that hold the head into the cabinet). Would anyone by chance know which size they are so I can order a few online?

Thanks,

Re: What size machine screws for the TT Combo?

Posted: Sun Apr 12, 2020 4:16 pm
by Boy_Narf
NVM braved the air and did it the old fashioned way. 10-32 X 1 1/2" is all they had (little short but still fit fine).

Re: What size machine screws for the TT Combo?

Posted: Thu Apr 23, 2020 8:49 pm
by Les Paul Lover
I can't remember of they are M5 or M6 screws.

All I know (I could do with new ones for my AD15) is that they're impossible to buy in less than 100s packs in the UK if you want them in black.

Re: What size machine screws for the TT Combo?

Posted: Thu Apr 23, 2020 8:51 pm
by Boy_Narf
Silver screws and Sharpe 🤣

Re: What size machine screws for the TT Combo?

Posted: Sat May 02, 2020 8:09 am
by Les Paul Lover
Boy_Narf wrote: ↑
Thu Apr 23, 2020 8:51 pm
Silver screws and Sharpe 🤣
Probably the best bet! Frustrating though. Ideally, I would need 4 short and 4 long ones for my AD15 as the PZ screw heads are worn. But I've been reluctant to both buy regular silver looking steel screws in modest quantities or to buy a truck load of black screws.

I've even contacted Orange, but they wouldn't entertain replying to me despite a couple of chasers........ :(