Taking off a switch, Help!

Orange Amps Technical Q&A's

Moderator: bclaire

Post Reply
Jelly
New Member
Posts: 32
Joined: Tue Jul 01, 2014 2:40 am
Location: British Columbia, Canada

Taking off a switch, Help!

Post by Jelly » Sun May 19, 2019 1:58 am

Some time ago, I snapped off the channel selection switch on my orange AD30HTC. I just recently got a new switch to replace it but I don't know how to take out the old one. I have my amp opened up, I just can't seem to figure out how to take out the switch without scratching everything up, the nut (or whatever it is) on the face of the amp is very tight.
Any and all help is extremely appreciated! Thank You!

Jondog
Duke of Orange
Posts: 7116
Joined: Thu Aug 21, 2008 12:16 pm
Location: Ontario, Canada

Re: Taking off a switch, Help!

Post by Jondog » Sun May 19, 2019 2:05 am

If you’re worried about scratching the faceplate, put some masking tape around the area. Pair of pliers and a rubber band around the nut if you’re worried about marring it.
Image

Jelly
New Member
Posts: 32
Joined: Tue Jul 01, 2014 2:40 am
Location: British Columbia, Canada

Re: Taking off a switch, Help!

Post by Jelly » Sun May 19, 2019 3:02 am

Jondog wrote:
Sun May 19, 2019 2:05 am
If you’re worried about scratching the faceplate, put some masking tape around the area. Pair of pliers and a rubber band around the nut if you’re worried about marring it.
Thanks man! Got it off without a scratch. 8)

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest