4x12 cab wiring
Posted: Tue Apr 02, 2019 2:49 pm
Has anyone got a PHOTO of the STANDARD wiring of an Orange 4x12 cab. I've opened up mine to replace a damaged speaker. But looking at the wiring it appears thus.....
Bottom speakers....left + (positive) connected to right - (negative) with orange wire.....Then left -(negative) connected to black wire with two spades, the other spade connected to right + (positive) which then feed the two top speakers splitting off to top left speaker - (negative) and right speaker (positive). Another orange wire connects top left + (positive) to top right -(negative)
My understanding was this cab was wired in series only? (16 ohm) So I assume this to be a series/parallel and if so is it correct? Its the angled 4x12 signature cab (Andy dunlop?)
Bottom speakers....left + (positive) connected to right - (negative) with orange wire.....Then left -(negative) connected to black wire with two spades, the other spade connected to right + (positive) which then feed the two top speakers splitting off to top left speaker - (negative) and right speaker (positive). Another orange wire connects top left + (positive) to top right -(negative)
My understanding was this cab was wired in series only? (16 ohm) So I assume this to be a series/parallel and if so is it correct? Its the angled 4x12 signature cab (Andy dunlop?)