VT1000 Tube tester adapters

[JCWamplifier]

I will be getting my VT1000 in a few days. I have made an adapter for 7027 valve since it is internally identical to a 6L6GC. The adapter passes all pins except pin 1 and 6 which are not present on a 6L6. I will see how it works on the 7027's. Let me know if any one else has any adapters for tubes for the VT 1000.

Thanks
Joe

[JCWamplifier]

It worked like a charm.

[Jondog]

It worked like a charm.

Neat. I don’t own one, but cool to hear it worked.

[megalithic]

I will be getting my VT1000 in a few days. I have made an adapter for 7027 valve since it is internally identical to a 6L6GC. The adapter passes all pins except pin 1 and 6 which are not present on a 6L6. I will see how it works on the 7027's. Let me know if any one else has any adapters for tubes for the VT 1000.

Thanks
Joe

Since those pins are not used on the 6L6, I would think it might work without the adapter as well.

I have tried an adapter to allow some octal valves in place of noval. The 6SN7 does not test correctly, not as 12AU7/ECC82 which would be the closest, or anything else. Just tests as faulty, even if that is not the case.

A 6SL7 however, can be tested as an ECC83, but the ones I have test as better than the best ECC83 I ever had. Personally I think the tester is just not calibrated for them. The adapter I have is for a 6V heater on the amp, not 12V.

I'll probably make an adapter for Soviet 6N1P and 6N2P valves sometime.