Page 1 of 1

Switching amps from 120 to 220 volt operation

Posted: Thu Nov 15, 2018 11:49 am
by Guitar77
Greetings,

I have Orange TH30 and Dark Terror heads buy through US vendors so they're set up for 120 volt operation.

I now live in Europe and My question is 'aside from sliding the voltage selector switch to 220, what are the recommended fuses to put inline, and is there any other change I need to do for 220-volt operation? Do I need to re-bias the amps?

Thanks in advance!

Re: Switching amps from 120 to 220 volt operation

Posted: Thu Nov 15, 2018 1:11 pm
by Sooner
You need to change the mains fuse to a T1A (1 amp slow blow). Are you sure there's a switch? I see it referenced in the manual but don't see it on the rear panel diagram.

Re: Switching amps from 120 to 220 volt operation

Posted: Thu Nov 15, 2018 1:14 pm
by Sooner

Re: Switching amps from 120 to 220 volt operation

Posted: Thu Nov 15, 2018 3:17 pm
by bclaire
Man, it's taken him a long time to change those over, eh?

Re: Switching amps from 120 to 220 volt operation

Posted: Thu Nov 15, 2018 5:41 pm
by Guitar77
So....I completely forgot that I posted this same question a few years back. Stuff got busy and my attention got distracted from changing the operating voltages. Nonetheless, thanks to all for the feedback.