Hello,
I'm in the U.S. and I'm just curious as to why this amp has the option of 110V and 118V ?
My other vintage oranges have 115V and the next available voltage is 200V 220V and 240V, so it's pretty easy to tell to just use the 115v.
I'm assuming use the 110V but I do know 115V is common here. Should I just measure the wall socket and use whatever is closer either 110v or 118v?
Or was 110V & 118V designed for another country?
Also, in the far bottom right in the picture, what does 100V Line mean? is that for the top 1/4 output jack or is that for the ohm selector? Should I only plug a speaker cab into the bottom of the two output jacks?
Thanks
which voltage should I run this amp at?
Moderator: bclaire
which voltage should I run this amp at?
Last edited by steamboat on Sat Sep 22, 2018 7:16 pm, edited 4 times in total.
Rollin with a fat sack of Oranges
-
- Forum Moderator
- Posts: 17905
- Joined: Thu May 02, 2002 9:19 pm
- Location: Outside Boston MA, USA
- Contact:
Re: which voltage should I run this amp at?
USA voltages are at least 118 volts. Use that one.
Re: which voltage should I run this amp at?
So use the 118V?
There is no 115V option. Like i said my other vintage amps have 115V as a choice.
I thought it was strange that this one had 110V & 118V as a choice.
Also in the far bottom right in the picture, what does 100V Line mean? is that for the top 1/4 output jack or is that for the ohm selector? Should I only plug a speaker cab into the bottom of the two output jacks?
thanks,
There is no 115V option. Like i said my other vintage amps have 115V as a choice.
I thought it was strange that this one had 110V & 118V as a choice.
Also in the far bottom right in the picture, what does 100V Line mean? is that for the top 1/4 output jack or is that for the ohm selector? Should I only plug a speaker cab into the bottom of the two output jacks?
thanks,
Rollin with a fat sack of Oranges
Re: which voltage should I run this amp at?
118. Some countries have 110, but NA is 115 or higher. I was measuring receptacle voltage at 125v the other day.
Re: which voltage should I run this amp at?
Thanks for clarifying that, much appreciated. I'll use the 118V.
Any idea what the 100V Line is all about?
Any idea what the 100V Line is all about?
Rollin with a fat sack of Oranges
-
- Orange Master
- Posts: 3845
- Joined: Sat Apr 05, 2003 6:18 pm
- Location: Connecticut, USA
Re: which voltage should I run this amp at?
Definitely use the 118V. The amp will still run too hot on that tap, running off the 110V tap would run it WAY too hot.
The 100V line OT secondary tap won't really be of any use to you. It's to connect the amp to a 100V line speaker system. The PA system in, say, your high school, likely had a 100V line system. When you have long runs of wire, an amplifier can't power a large number of speakers with the wire creating resistance over large distances. So the speakers are powered off a 100V line and the amp drives them.
I'm not sure if that was ever even used for guitar amps back in the 70's. Maybe some of our older members may know. My '71 head (see sig pic) has this tap. I've never used it.
-Nick
The 100V line OT secondary tap won't really be of any use to you. It's to connect the amp to a 100V line speaker system. The PA system in, say, your high school, likely had a 100V line system. When you have long runs of wire, an amplifier can't power a large number of speakers with the wire creating resistance over large distances. So the speakers are powered off a 100V line and the amp drives them.
I'm not sure if that was ever even used for guitar amps back in the 70's. Maybe some of our older members may know. My '71 head (see sig pic) has this tap. I've never used it.
-Nick
'71 GRO100 || '96 OR-80 || AD30 || '64 AC-50 || AC-30TBX || Hiwatt DR504 || HI-TONE HT30
LP Standard || LP Studio || LP Custom Lite || Ric 620 || Ric 360 || MIA Tele || SG 61 RI
Re: which voltage should I run this amp at?
Nick,
Thanks for the info! I appreciate it.
This is also a Pics only Plexi amp. Whats the serial number on your 71 Plexi?
Thanks for the info! I appreciate it.
This is also a Pics only Plexi amp. Whats the serial number on your 71 Plexi?
Rollin with a fat sack of Oranges
-
- Orange Master
- Posts: 3845
- Joined: Sat Apr 05, 2003 6:18 pm
- Location: Connecticut, USA
Re: which voltage should I run this amp at?
Nice! I have #559
'71 GRO100 || '96 OR-80 || AD30 || '64 AC-50 || AC-30TBX || Hiwatt DR504 || HI-TONE HT30
LP Standard || LP Studio || LP Custom Lite || Ric 620 || Ric 360 || MIA Tele || SG 61 RI
Who is online
Users browsing this forum: No registered users and 8 guests