Rockerverb 100 cabling.

Orange Amps Technical Q&A's

Moderator: bclaire

Post Reply
Robertgoodwin244
New Member
Posts: 2
Joined: Mon Apr 16, 2018 4:17 pm

Rockerverb 100 cabling.

Post by Robertgoodwin244 » Mon Apr 16, 2018 4:25 pm

Hi guys, sorry for the noob question here. I recently bought a MK1 Rockerverb 100 with an Orange open back 2x12.

How should I be cabling from the head to the cab? One cable from the 16ohm to either of the two cab inputs?

Also how hot should my head be getting? It’s my first tube head and it seemed really hot after practice!

Cheers!

bclaire
Forum Moderator
Posts: 17905
Joined: Thu May 02, 2002 9:19 pm
Location: Outside Boston MA, USA
Contact:

Re: Rockerverb 100 cabling.

Post by bclaire » Mon Apr 16, 2018 4:34 pm

You want a single speaker cable from 16 ohm out to any one of the cab's jacks. The other jack is for a second cab (and if you got a second 16 ohm cab, you would then plug the first cable into the 8 ohm out)

Robertgoodwin244
New Member
Posts: 2
Joined: Mon Apr 16, 2018 4:17 pm

Re: Rockerverb 100 cabling.

Post by Robertgoodwin244 » Mon Apr 16, 2018 4:37 pm

I thought as much. The main reason I asked is when wired that way at one point I lost nearly all volume? Then when I switched over to 8ohm it was fine?

bclaire
Forum Moderator
Posts: 17905
Joined: Thu May 02, 2002 9:19 pm
Location: Outside Boston MA, USA
Contact:

Re: Rockerverb 100 cabling.

Post by bclaire » Mon Apr 16, 2018 4:43 pm

Robertgoodwin244 wrote:
Mon Apr 16, 2018 4:37 pm
I thought as much. The main reason I asked is when wired that way at one point I lost nearly all volume? Then when I switched over to 8ohm it was fine?
Now that's weird... no idea.

Post Reply

Who is online

Users browsing this forum: No registered users and 46 guests