Orange Amps Forum

I thought I would bring this question to the official channel so:

Has anybody ever added a Power Amp IN (or FX Loop) to an AD200B MkIII?

I have a couple of preamps that I would love to run into the power section of the Orange to get different flavours depending on the gig and thought this may be a mod that isn't impossible.

Thoughts?

I can just run them into the front I guess as the preamp is fairly basic but just thought it could be something to do.

Never to an AD200, but shouldn’t be hard to do. Also depends if you want a proper effects loop or just preamp out/power amp in jacks like on the OR120’s.

Jondog wrote: ↑

Tue Mar 13, 2018 2:07 am

Never to an AD200, but shouldn’t be hard to do. Also depends if you want a proper effects loop or just preamp out/power amp in jacks like on the OR120’s.

Really just after the POWER IN.

I wasn't aware the OR120 had those. Could possibly help as now I can get a schematic.

Could probably get away with a single switching jack inserted after the tone stack that disconnects the preamp when a cable is plugged in.