Cr60c power problem

Chicagobill · Post by **Chicagobill** » Sun Sep 03, 2017 12:37 pm

The day before my first band gig my Cr60c would not turn on. There was nothing new as far as power source. Always plugged into the same power strip. I tried plugging it into three different wall sockets and nothing. No light and no power. The amp sat for two days and before taking it back to GC I tried one more time and the jewel didn't light up but I could hear the hum indicating it was on. I turned it off, plugged my SG into it and turned it on again. The jewel light flickered but I could play through the amp. That was yesterday. Today the amp works perfectly. I'm at a loss. I'm concerned about gigging with it (which is why I bought it) in its current state. It's still under warranty. Any ideas what is wrong? Is it an easy fix or should I just exchange it for a new one?

fiveightandten · Post by **fiveightandten** » Sun Sep 03, 2017 3:12 pm

Solid state amps are not usually an easy fix. Get a new one while it's still under warranty.

OrangeBoy · Post by **OrangeBoy** » Mon Sep 04, 2017 9:23 am

Was the power lead pushed in and seated properly into the back of the amp? I had a similar problem with my CR60C once but over a shorter period. Pushed the plug in properly and problem gone.

Chicagobill · Post by **Chicagobill** » Mon Sep 04, 2017 12:07 pm

I'm taking it back today. Thanks for the replies.

Cr60c power problem

Cr60c power problem

Re: Cr60c power problem

Re: Cr60c power problem

Re: Cr60c power problem

Who is online