Orange Amps Technical Q&A's
Moderator: bclaire
-
roffy
- New Member
- Posts: 15
- Joined: Tue Sep 16, 2003 3:47 pm
- Location: United Kingdom
Post
by roffy » Tue Sep 16, 2003 3:52 pm
Just so that I get this completely right and blow up my most treasured possession.
I have a AD30TC and a Sound City 4x12 Cabinet (16ohm). I'm a bit new to using a cab with a combo. In the back of my AD30TC I have the x2 speakers plugged into the 16ohm output, and x2 free 8ohm sockets.
Is this correct? If I move the combo speakers into on of the 8ohm sockets and plug the 4x12 into the other 8ohm socket is this right? If not, what should I do, I really don't want to damage either of them.
Thanks, hope you can help?
Roffy
-
bclaire
- Forum Moderator
- Posts: 17905
- Joined: Thu May 02, 2002 9:19 pm
- Location: Outside Boston MA, USA
-
Contact:
Post
by bclaire » Fri Sep 19, 2003 11:43 am
That should be correct: two speaker setups or cabinets- each must be a 16 ohm load and then you plug both into the two 8 ohm outputs.
-
pollux
- New Member
- Posts: 7
- Joined: Sat Sep 20, 2003 4:53 am
- Location: USA
Post
by pollux » Sat Sep 20, 2003 4:57 am
Yes, that should definately work. im running something very similar to that right now.
-
roffy
- New Member
- Posts: 15
- Joined: Tue Sep 16, 2003 3:47 pm
- Location: United Kingdom
Post
by roffy » Sat Sep 20, 2003 10:31 am
Thanks guys, just wanted to be sure. My Orange is far far too precious to mess up
Thanks again
Who is online
Users browsing this forum: No registered users and 117 guests