Hi,
Due to a recent HT fuse problem with my Rockerverb 50 I would like to carry spares with me.
The back of my Rockerverb says T 630mA H
However when I opened it, the fuse inside says T 630mA L
(The amp has been bought new and it is the first time I look at the fuse)
When I searched for fuses on Ebay I read a note from the seller saying:
The L in this fuse denotes a low break capacity standard fuse, this will replace fuses which have A or AL, but cannot be used to replace a fused marked AH. If your fuse is marked with a H please see our listings for ceramic fuses
Orange owner's guide only says T630mA....
Does anyone know what I should get?
Thanks
FUSE HELP
Moderator: bclaire
-
- New Member
- Posts: 5
- Joined: Tue Jan 26, 2016 10:32 pm
- Location: Glasgow
FUSE HELP
Rockerverb 50 MKIII - Matamp 212
Gibson SG - Fender Jaguar
Gibson SG - Fender Jaguar
Re: FUSE HELP
Get the H labeled fuses. I wonder why you're having fuse problems though. There's nothing wrong with the L fuse, but perhaps if your tubes are drawing a bit more current that may be why it blew. It'll blow sooner with the L fuse than the H fuse. If the H fuses blow, I'd be looking elsewhere for a problem than the fuse.
Who is online
Users browsing this forum: No registered users and 155 guests