I don't think it will matter which switch you use. The Crush amps all seem to light the foot switch LED when the Clean Channel is in use.ChrisinMO wrote:Well, I got the new switch and it is on for clean and off for dirt. Weird!!! Reverb worked fine it seemed.
I can't find a wiring diagram...
Moderator: bclaire
-
- Lord of Orange
- Posts: 10149
- Joined: Tue Sep 29, 2009 3:44 am
Re: I can't find a wiring diagram...
_________________
Re: I can't find a wiring diagram...
That's what it looks like. Thanks for everyone's help.
Re: I can't find a wiring diagram...
I'm making a spare switch for my Dual Terror. In the FS-1, can the resistor be deleted? I subbed a Mesa Rectifier switch and all worked correctly. The Mesa switch has a LED but no resistor.
Re: I can't find a wiring diagram...
The LED has to be able to handle the voltage or it will blow. That's why the resistor is there. Not familiar with how Mesa wires theirs up or what voltage they're sending to the switch.
Re: I can't find a wiring diagram...
Thanks!
Radio Shack has a variety of 470 ohm resistors--all rated by different wattages. Which wattage is the FS-1 resistor? I've already tried a half-watt size (seems much too big) and it does not allow the light to function.
AND which size, power-wise, of LED is correct?
Radio Shack has a variety of 470 ohm resistors--all rated by different wattages. Which wattage is the FS-1 resistor? I've already tried a half-watt size (seems much too big) and it does not allow the light to function.
AND which size, power-wise, of LED is correct?
Re: I can't find a wiring diagram...
Just a regular 3 or 5mm led and around 1k-1.5k resistor. 1/2 watt is fine.
Re: I can't find a wiring diagram...
Bear in mind that the LED is polarised. That is, it will only work one way round - it only allows current to flow in one direction.I've already tried a half-watt size (seems much too big) and it does not allow the light to function.
If it isn't working the way you have it, try swapping the led connections.
I can't see why it wouldn't work with a 470 ohm resistor.
Cheers,
Jon
-
- Duke of Orange
- Posts: 6821
- Joined: Tue Aug 18, 2009 9:08 am
- Location: Derby, England
Re: I can't find a wiring diagram...
Also, these led don't need too much heat to fry when you solder them. It's easy to destroy them if you spend a little too long there with your iron.
Ant
Orange Gear: RV50 MKI, R30, AD15, PPC212
And.... Genz Benz Black Pearl 30
Past Orange: AD30TC Combo, TT, AD5
Guitars: Gibson Les Paul Standard Faded, Vigier Expert Retro 54, Gibson SG 70s Tribute, Aria Pro II RS X80, G&L ASAT Special Tribute
Orange Gear: RV50 MKI, R30, AD15, PPC212
And.... Genz Benz Black Pearl 30
Past Orange: AD30TC Combo, TT, AD5
Guitars: Gibson Les Paul Standard Faded, Vigier Expert Retro 54, Gibson SG 70s Tribute, Aria Pro II RS X80, G&L ASAT Special Tribute
Who is online
Users browsing this forum: No registered users and 243 guests