Page 3 of 3
Re: Orange Amps Tube Layout Guide
Posted: Fri Nov 01, 2019 11:37 pm
by plushsafehethink
The manual has the tube layout but unfortunately doesn't state which tube is V1, V2, PI etc. I emailed Orange about it but am still waiting for a response. I'll post it here as soon as I get a response.
Re: Orange Amps Tube Layout Guide
Posted: Sat Nov 02, 2019 4:16 pm
by Jondog
With a pic of the board, might be able to decipher
Re: Orange Amps Tube Layout Guide
Posted: Sun Nov 03, 2019 2:18 pm
by Sootio
V1 will be the closest to the input. V2 will be next to that. The PI will probably be located in front of those tubes.V1 is gain, V2 powers the tremelo, the 2 12at7s are for the loop and reverb, the last one is the PI. You should be able to suss it out pretty easily.
Re: Orange Amps Tube Layout Guide
Posted: Sun Nov 03, 2019 8:42 pm
by plushsafehethink
Intuitively I figured it would be closest to the input. I'll have to pull the chassis out tomorrow and take a pic but this is from the manual.
Re: Orange Amps Tube Layout Guide
Posted: Sun Nov 03, 2019 9:32 pm
by plushsafehethink
Just decided to go ahead and take it out.
Re: Orange Amps Tube Layout Guide
Posted: Sun Nov 03, 2019 10:41 pm
by Sootio
plushsafehethink wrote: ↑Sun Nov 03, 2019 9:32 pm
Just decided to go ahead and take it out.
Cool! I think you've got it covered at this point. BTW, I got my info from the Orange site, so it should be spot on.
Re: Orange Amps Tube Layout Guide
Posted: Sun Nov 03, 2019 11:22 pm
by plushsafehethink
Thanks for the help all, It's appreciated!1
Best,
Justin