Orange Amps Technical Q&A's
Moderator: bclaire
-
der Gerrit
- New Member
- Posts: 11
- Joined: Mon Dec 09, 2002 4:25 pm
- Location: Germany
Post
by der Gerrit » Sun Dec 15, 2002 8:07 pm
Hi! I have a problem with my Orange AD30HTC!
Sometimes the Channel Two is much more quite than Channel One.
If I "shake" it a little bit it works normally again.
Is it possible that maybe the tubes aren't really connected or something like that?
Another question:
Is it normal that at Channel One the Sound gets extra loud if I turn it up from 10 to 11(Master)? It's like a step. Should that also happen at Channel Two?
Thank you very much for helping me!
Gonna take my chance,
gonna rock and dance!
Gonna take my chance,
gonna rock and dance!
-
Meole
- Orange Master
- Posts: 1104
- Joined: Wed May 29, 2002 5:03 pm
- Location: Canada
Post
by Meole » Mon Dec 16, 2002 2:47 am
Shaking it is not good. Same with dropping it!!
-
der Gerrit
- New Member
- Posts: 11
- Joined: Mon Dec 09, 2002 4:25 pm
- Location: Germany
Post
by der Gerrit » Tue Jan 07, 2003 4:05 pm
Allright. Now I know what was damaged at my amplifier.
The tube-socket had a problem with one connection, so that sometimes the amp wasn't able to use one or some tubes...
Gonna take my chance,
gonna rock and dance!
Gonna take my chance,
gonna rock and dance!
-
pgmlml
- New Member
- Posts: 11
- Joined: Thu Apr 25, 2002 9:01 pm
- Location: Portugal
Post
by pgmlml » Sun Jan 12, 2003 11:11 pm
By the way you describe it, seems that one side of the PI has a bad contact... I had a similar problem!
Open your amp, get a wood stick, and with the amp turned ON, hit each conection, till you find your bad joint. Then Solder it agin! That's what i did!
Who is online
Users browsing this forum: No registered users and 89 guests