JRT Send Output ?

Orange Amps Technical Q&A's

Moderator: bclaire

Post Reply
Gordy G
Tiny Terror
Posts: 125
Joined: Thu Nov 12, 2015 7:53 pm
Location: Warrington,NW England

JRT Send Output ?

Post by Gordy G » Fri Aug 11, 2017 10:01 am

i'm taking a signal from the send output of my JRT,the signal is variable using the Volume knob,can anyone tell me if it's a pre only signal,or is it pre/power,hope i'm explaining this well enough.
Thanks,Graham.

PBA
Tiny Terror
Posts: 107
Joined: Wed Jul 15, 2015 2:01 pm

Re: JRT Send Output ?

Post by PBA » Fri Aug 11, 2017 10:31 am

The effects loop is after the pre-amp and before the power amp. All the controls, including volume are before the effects send.

Gordy G
Tiny Terror
Posts: 125
Joined: Thu Nov 12, 2015 7:53 pm
Location: Warrington,NW England

Re: JRT Send Output ?

Post by Gordy G » Fri Aug 11, 2017 10:48 am

Thanks PBA.

Jondog
Duke of Orange
Posts: 6421
Joined: Thu Aug 21, 2008 12:16 pm
Location: Ontario, Canada

Re: JRT Send Output ?

Post by Jondog » Fri Aug 11, 2017 1:02 pm

Be a good idea to pull the power valves out of the JRT.
Image

Gordy G
Tiny Terror
Posts: 125
Joined: Thu Nov 12, 2015 7:53 pm
Location: Warrington,NW England

Re: JRT Send Output ?

Post by Gordy G » Fri Aug 11, 2017 2:51 pm

Why would I need to do that Jondog?.

Jondog
Duke of Orange
Posts: 6421
Joined: Thu Aug 21, 2008 12:16 pm
Location: Ontario, Canada

Re: JRT Send Output ?

Post by Jondog » Fri Aug 11, 2017 10:08 pm

Unnecessary wear, depending how long you're planning to run it like this. Also if you don't have a cab hooked up, you could destroy the tubes and transformers.
Image

Gordy G
Tiny Terror
Posts: 125
Joined: Thu Nov 12, 2015 7:53 pm
Location: Warrington,NW England

Re: JRT Send Output ?

Post by Gordy G » Sat Aug 12, 2017 7:48 am

Jondog wrote:
Fri Aug 11, 2017 10:08 pm
Unnecessary wear, depending how long you're planning to run it like this. Also if you don't have a cab hooked up, you could destroy the tubes and transformers.
Thanks,Jondog.Ok I understand,i'll explain what i'm doing with send output.
I'm running the JRT as normal with speaker connected(8 ohm),then i'm plugging the send into the Natural input in my R30C & using both amps.
Cheers,Graham.

Post Reply

Who is online

Users browsing this forum: Google [Bot] and 7 guests