Page 1 of 1

Baritone guitars....

Posted: Fri May 29, 2020 1:03 am
by bclaire
Just got this- bought a Fender conversion baritone neck from their website; originally planned on replacing the neck on one of my Teles; then spotted this loaded lefty Tele body on ebay and voila!

Tuning is A D G C E A
Strings are 72-13

Image

Image

Image

Re: Baritone guitars....

Posted: Fri May 29, 2020 1:05 am
by bclaire
and yes, I clipped those strings sticking out on the neck! ha ha ha :mrgreen:

Re: Baritone guitars....

Posted: Sun May 31, 2020 9:01 pm
by Mystic38
like a reverse Hendrix guitar!

how is it to play?

Re: Baritone guitars....

Posted: Mon Jun 01, 2020 11:55 am
by Jondog
Nice! I've always been tempted to get a baritone.

Re: Baritone guitars....

Posted: Tue Jun 02, 2020 2:23 am
by groundmeat
A lefty tele strung righty? So that wins for oddest thing I've seen in a while. :lol:

I suppose a baritone tele would be good for this:

https://www.youtube.com/watch?v=mvZ5E5_Uuik

I always thought that was one of the coolest sounds I ever heard from the country music realm.

I've attempted to approximate it through my Rockerverb 100 mk3 using the clean channel with an old EHX Deluxe Electric Mistress set to filter mode to goose the mids, an EHX Pitch Fork to tune down, and a Catalinbread Talisman plate reverb in the loop for reverb.

Re: Baritone guitars....

Posted: Tue Jun 02, 2020 5:11 pm
by bclaire
groundmeat wrote:
Tue Jun 02, 2020 2:23 am
A lefty tele strung righty? So that wins for oddest thing I've seen in a while. :lol:

I suppose a baritone tele would be good for this:

https://www.youtube.com/watch?v=mvZ5E5_Uuik

I always thought that was one of the coolest sounds I ever heard from the country music realm.

I've attempted to approximate it through my Rockerverb 100 mk3 using the clean channel with an old EHX Deluxe Electric Mistress set to filter mode to goose the mids, an EHX Pitch Fork to tune down, and a Catalinbread Talisman plate reverb in the loop for reverb.
Cool! Not a country guy myself but I'll try learning that!

Re: Baritone guitars....

Posted: Tue Jun 02, 2020 5:12 pm
by bclaire
Mystic38 wrote:
Sun May 31, 2020 9:01 pm
like a reverse Hendrix guitar!

how is it to play?
Very easy to play. With a baritone it's not like I'll be going way up on the neck. I think...

Re: Baritone guitars....

Posted: Sun Jun 21, 2020 11:09 pm
by Les Paul Lover
Didn't see that post!!!!!
Looks very cool!!! Does the extra l9ng neck make it back heavy?

I had a guitar tuned to C standard for a while, that was really fun to play. I bet the baritone would sound pretty different though- would love to try it!!!!

Re: Baritone guitars....

Posted: Mon Jun 22, 2020 1:09 pm
by bclaire
Les Paul Lover wrote:
Sun Jun 21, 2020 11:09 pm
Didn't see that post!!!!!
Looks very cool!!! Does the extra l9ng neck make it back heavy?

I had a guitar tuned to C standard for a while, that was really fun to play. I bet the baritone would sound pretty different though- would love to try it!!!!
It's a little neck heavy but that would be expected since the strap point on a flipped over lefty is lower than normal...

Re: Baritone guitars....

Posted: Sat Mar 06, 2021 11:52 am
by groundmeat
bclaire wrote:
Fri May 29, 2020 1:03 am
Just got this- bought a Fender conversion baritone neck from their website; originally planned on replacing the neck on one of my Teles; then spotted this loaded lefty Tele body on ebay and voila!
So Fender sells baritone sized necks and all you gotta do is swap out a regular neck for the longer one, no bridge changes at all?

I was considering buying some cheap little Jackson or LTD 7-string for a tuned down kinda sound, but I have a bit of prejudice against dropped low string tunings, and I think I'd instantly get more out of a 6-string baritone being that I'm not used to a wider 7-string neck.

Re: Baritone guitars....

Posted: Sat Mar 06, 2021 10:09 pm
by bclaire
groundmeat wrote:
Sat Mar 06, 2021 11:52 am
bclaire wrote:
Fri May 29, 2020 1:03 am
Just got this- bought a Fender conversion baritone neck from their website; originally planned on replacing the neck on one of my Teles; then spotted this loaded lefty Tele body on ebay and voila!
So Fender sells baritone sized necks and all you gotta do is swap out a regular neck for the longer one, no bridge changes at all?

I was considering buying some cheap little Jackson or LTD 7-string for a tuned down kinda sound, but I have a bit of prejudice against dropped low string tunings, and I think I'd instantly get more out of a 6-string baritone being that I'm not used to a wider 7-string neck.
Yeah - Fender sells drop-in necks that convert to baritone. I think they have a Strat neck now, too.

Re: Baritone guitars....

Posted: Sun Mar 07, 2021 2:32 pm
by Gorgar
There's also the Fender Sub-Sonic, which is just a baritone Strat. Sounds pretty mighty through a Thunderverb.