Orange Amps Forum

guys I feel very bad because im using my th30 head with my PPC412com connected by the two 8ohms sockets to the two inputs jacks of the cab (16ohms) my amp don't have any problems sounds good like always but today I read that second input is for daisy chain this surprise me I think a lot, I remember read something of connecting that way now I connect the 16ohms output to one of the inputs and sound good like always can I do some damage for the way I connected before ?

help me please

the fuse never fail, the valves are good , sounds good ...

Wow... you are lucky!

One cab - one connecting cable, is all that is necessary into the 16 ohm out.

bclaire wrote: ↑

Tue Aug 14, 2018 1:09 pm

Wow... you are lucky!

One cab - one connecting cable, is all that is necessary into the 16 ohm out.

o my god really are i misread the manual somethin like one 16 ohms to one 16 ohms input, two 8 ohms to two 16 ohms inputs but i dont read that refer a two cabs :O but the amp dont do any noise yeasterday i connect 16 ohms to one of the inputs but i starting to think a lot some advice something to check '