searching for knowledge

Orange Amps General Forum

Moderator: bclaire

Post Reply
bandincdgo
New Member
Posts: 2
Joined: Tue Aug 14, 2018 5:04 am

searching for knowledge

Post by bandincdgo » Tue Aug 14, 2018 5:15 am

guys I feel very bad because im using my th30 head with my PPC412com connected by the two 8ohms sockets to the two inputs jacks of the cab (16ohms) my amp don't have any problems sounds good like always but today I read that second input is for daisy chain :o this surprise me I think a lot, I remember read something of connecting that way now I connect the 16ohms output to one of the inputs and sound good like always can I do some damage for the way I connected before ?

help me please :(

the fuse never fail, the valves are good , sounds good ...

bclaire
Forum Moderator
Posts: 17581
Joined: Thu May 02, 2002 9:19 pm
Location: Outside Boston MA, USA
Contact:

Re: searching for knowledge

Post by bclaire » Tue Aug 14, 2018 1:09 pm

Wow... you are lucky!

One cab - one connecting cable, is all that is necessary into the 16 ohm out.

bandincdgo
New Member
Posts: 2
Joined: Tue Aug 14, 2018 5:04 am

Re: searching for knowledge

Post by bandincdgo » Tue Aug 14, 2018 1:46 pm

bclaire wrote:
Tue Aug 14, 2018 1:09 pm
Wow... you are lucky!

One cab - one connecting cable, is all that is necessary into the 16 ohm out.
o my god really are i misread the manual somethin like one 16 ohms to one 16 ohms input, two 8 ohms to two 16 ohms inputs but i dont read that refer a two cabs :O but the amp dont do any noise yeasterday i connect 16 ohms to one of the inputs but i starting to think a lot some advice something to check '

Post Reply

Who is online

Users browsing this forum: adkguy07 and 12 guests