So, I just bought a TH30 head (with no cab) BUT i do however have a 2x12 subzero cab (link below)
http://www.gear4music.com/Guitar-and-Ba ... er-Cab/NE4
The specs on the CAB state: Power Output: 1 ch: RMS 200W into 8Ω, 2 ch: RMS 100W into 16Ω
which output on the amp do i plug into the cab? and which side of the cab? the 8ohm slot or the 'stereo' 16 ohm side ?
I dont usually post on these sites but I love this head so much I do not want to break it!
Thankyou
NEW PURCHASE. HELP NEEDED!
Moderator: bclaire
-
- Forum Moderator
- Posts: 17905
- Joined: Thu May 02, 2002 9:19 pm
- Location: Outside Boston MA, USA
- Contact:
Re: NEW PURCHASE. HELP NEEDED!
That's written very strangely. It's a stereo cab I guess? Basically, it sounds like it has two 16 ohm speakers that you can run with two amps so each would be 16 ohm, but if you're running both speakers from one amp it is an 8 ohm load so you would plug the cabinet into the 8 ohm out on your amp. (8ohm to 8 ohm)
Re: NEW PURCHASE. HELP NEEDED!
Agree with Billy. Sounds like you use the 8 ohm option on the cab with the 8 ohm output on the amp.
Re: NEW PURCHASE. HELP NEEDED!
Very cool stuff!
Who is online
Users browsing this forum: No registered users and 365 guests