Footswich for CR120?
Moderator: bclaire
Footswich for CR120?
Hello everyone. Long time lurker, first time poster. I'm a little obsessed (to say the least) with doom metal, effects pedals, Gibson SGs, and of course Orange amps. I've owned Micro Terror for awhile and I just added a CR120 to my amp collection. I was able to get a stupid good deal on a used one. I was wondering what footswitches work with this model. Thanks in advance!
Re: Footswich for CR120?
Hi Krosis and welcome to the forum. Prepare to spend some money...
I use an FS1 for channel switching only. If you'd also like to switch the reverb on/off you'll need an FS2 and 2 guitar cables. There are many switches that work with the amp, you don't need Orange's own (though they're pretty classy...)
I use an FS1 for channel switching only. If you'd also like to switch the reverb on/off you'll need an FS2 and 2 guitar cables. There are many switches that work with the amp, you don't need Orange's own (though they're pretty classy...)
RV100 MKIII | '75 OR120 | OR100 | OR50 | CS50 | R30H | TT
2 x PPC412
Bax B. | Amp D.
Marshall 1959 HW + 1936V
Fender '65 Super Reverb Reissue
Vox AC30C2X + V212C
Playing Les Pauls and Teles...
Re: Footswich for CR120?
Thank you!
Who is online
Users browsing this forum: No registered users and 123 guests