Page 1 of 1
Posted: Mon Nov 10, 2008 4:50 am
by NeedInfo
I have an AD140TC head which I run through a PPC412 cabinet. My head only has one 16 ohm output, But I Need A Bit Bigger Sound. I've been looking into getting a PPC212. I've tried a couple other 2x12's but nothing can compare to the Orange sound. Unfortunately the PPC212 is 16 ohm. I noticed in a guitar world though, that the guitarist from Fall Of Troy runs two PPC412's through one AD140TC. I was wondering if anyone here knows how I could run a PPC212 and My PPC412 through my AD140TC, or how the guitarist from Fall Of Troy does it, I would greatly Appreciate It!
Posted: Mon Nov 10, 2008 4:55 am
by DonKunto
You just run the two cabs to the 8 ohm outs. I run the AD140 through a PPC412 and a PPC212 as well, you'll like it!
Posted: Mon Nov 10, 2008 5:01 am
by screamingdaisy
Two 16 ohm cabs run in parallel combine for 8ohm.
There are two 8ohm jacks strategically placed on the back of the AD140.
Problem solved.
Posted: Mon Nov 10, 2008 5:12 am
by NeedInfo
Just to clarify, I plug the 412 into the 8 ohm slot and the 212 into the 8 ohm slot and it will be fine?
Posted: Mon Nov 10, 2008 6:26 am
by the_blue_bomber
<blockquote id="quote"><font size="2" face="Verdana" id="quote">quote:<hr height="1" noshade id="quote"><i>Originally posted by NeedInfo</i>
<br />Just to clarify, I plug the 412 into the 8 ohm slot and the 212 into the 8 ohm slot and it will be fine?
<hr height="1" noshade id="quote"></font id="quote"></blockquote id="quote">yes.
Posted: Mon Nov 10, 2008 6:34 am
by Bandeapart
I use to run that same setup but with a Rocker 30 head, it's possible and sounds great!