Strat Tremolo Help

Orange Amps General Forum

Moderator: bclaire

Post Reply
inrainbows
New Member
Posts: 17
Joined: Sun Feb 17, 2008 1:58 am
Location: Canada

Post by inrainbows » Mon Feb 25, 2008 2:28 am

So I took apart my strat and tried to put it back together and now the tremolo block looks like its 3/4 of an inch off the body when it used to just sit nicely on top. I've tried spring placement but does anyone have any idea and how to get the bridge to rest lightly on the body instead of hovering out?
thanks. I use 11 gauge's by the way.

rrrajo
Lord of Orange
Posts: 12344
Joined: Wed Oct 26, 2005 2:15 am
Location: Refugee, Mainland

Post by rrrajo » Mon Feb 25, 2008 2:31 am

You Probably socked the 6 screws down too tight and it is "popping a wheelie" on the knife edge.
simply back out each screw a turn until it rests close to the body. Then tighten the two screws in the spring cavity for more tension. Loosen the strings first for ease.
Jimy...HM#5
--------------------
Image

Bentfinger
Orange Master
Posts: 3801
Joined: Sun Aug 28, 2005 5:11 am
Location: USA

Post by Bentfinger » Tue Feb 26, 2008 4:37 am

Go to this site, and order the book "how to make your electric guitar play great" ... I have many books on guitar setup & repair, but this has the best strat info... Also, does your strat have the vintage (6 pivot screws) or the 2 point tremelo?

http://www.danerlewine.com/guitar_repair_books.html
http://www.myspace.com/fragilexrock
http://www.myspace.com/beautifulguitar1

"I Wanted To Be A Rock Star, But I Must of Been Standing In The Wrong Line"

SimpleTone
Rocker
Posts: 219
Joined: Mon Oct 22, 2007 5:24 am
Location: Australia

Post by SimpleTone » Tue Feb 26, 2008 4:40 am

Same problem when I swapped to heavier strings. I run 4 springs now. That did the job for me.

Post Reply

Who is online

Users browsing this forum: No registered users and 7 guests