Page 1 of 1
Posted: Fri Feb 22, 2008 7:02 pm
by inrainbows
Hey,
I'm looking to buy a Strat Body off ebay and I was wondering what is the difference between the 57 reissues, the 64 reissue and the 70's reissue. From what I can gather, the bodies basically got heavier in weight? This is just a guess. Let me know if you can clear things up. Thanks.
Posted: Fri Feb 22, 2008 9:00 pm
by bclaire
Well, with the reissues, the body weight is pretty much all going to be in the same ballpark- it's the REAL guitars from those eras that have the varying weight, with many 70's being the heavyweight culprits.
I don't know for sure, but as far as differences, the only difference I can think of SHOULD be a slight difference in the route for the control cavity. Around the point where the three-way switch is located there is a 'shoulder' in the routing for the extra screw in the pickguard that later versions had... I'm not so sure that they're that particular- but I would not be surprised if the MIJ/ Japanese version was detailed correctly!
Posted: Fri Feb 22, 2008 9:04 pm
by bclaire
Guess I'm right. Here's a 57 reissue:
and a 62:
Posted: Fri Feb 22, 2008 9:09 pm
by BrianGT
Wow! So obvious when you seem them side by side like that!
Posted: Fri Feb 22, 2008 9:11 pm
by bclaire
70's will be similar to the 60's EXCEPT it will have a three bolt neck. Avoid that...
Posted: Fri Feb 22, 2008 9:12 pm
by bclaire
<blockquote id="quote"><font size="1" face="Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote"><i>Originally posted by BrianGT</i>
<br />Wow! So obvious when you seem them side by side like that!
<hr height="1" noshade id="quote"></font id="quote"></blockquote id="quote">
What's really scary is I know all this stuff... Sheryl always used to brag about me to other musicians that "Billy knows what the correct screws are on a '57 Tele..."
Posted: Fri Feb 22, 2008 9:28 pm
by Tafarel
I could be wrong, but I had come to understand that the '50s era strats had deeper body contours.
Posted: Fri Feb 22, 2008 9:33 pm
by BrianGT
<blockquote id="quote"><font size="1" face="Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote">What's really scary is I know all this stuff... Sheryl always used to brag about me to other musicians that "Billy knows what the correct screws are on a '57 Tele..."<hr height="1" noshade id="quote"></font id="quote"></blockquote id="quote">
Well I wouldn't be worried about that! In Sheryl's eyes you are obviously one cool guy!
Posted: Sat Feb 23, 2008 12:47 am
by bclaire
<blockquote id="quote"><font size="1" face="Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote"><i>Originally posted by Tafarel</i>
<br />I could be wrong, but I had come to understand that the '50s era strats had deeper body contours.
<hr height="1" noshade id="quote"></font id="quote"></blockquote id="quote">
They should have... as far as I know, only custom shops had deeper contours... these two are the same as far as I can tell:
57 back:
62 back:
