AD30 low and high inputs

deepspacenyne · Post by **deepspacenyne** » Thu Jul 22, 2004 12:47 pm

can anyone tell me the difference between the low and hign inputs on the ad30 head?

thanks

deepspacenyne · Post by **deepspacenyne** » Mon Jul 26, 2004 11:57 am

any offers?

User · Post by **User** » Mon Jul 26, 2004 11:59 am

What is the difference between high and low inputs?

Older Oranges have high and low inputs. The low input is buffered for a lower volume, the high is a straight signal into the amp. It is unadvisable to run two instruments into the amp simultaneously.

From the FAQ in the support section.

Dave

deepspacenyne · Post by **deepspacenyne** » Mon Jul 26, 2004 1:23 pm

cheers dave...i should have looked there. seems like there must be a resistor in the low input then.

Post by **bclaire** » Mon Jul 26, 2004 3:21 pm

Bingo...

deepspacenyne · Post by **deepspacenyne** » Tue Jul 27, 2004 9:33 am

WTF has bingo got to do with anything?

saewat · Post by **saewat** » Tue Jul 27, 2004 3:11 pm

Take a chill pill deepspacenyne.

Also, you spelled nyne wrong.

Sae "say what?" Lee

Post by **bclaire** » Tue Jul 27, 2004 5:34 pm

<BLOCKQUOTE id=quote><font size=1 face="Verdana, Arial, Helvetica" id=quote>quote:<hr height=1 noshade id=quote>
WTF has bingo got to do with anything?

<hr height=1 noshade id=quote></BLOCKQUOTE id=quote></font id=quote><font face="Verdana, Arial, Helvetica" size=2 id=quote>

Bingo meaning you are correct about resistor across the input.

AD30 low and high inputs

Who is online