Would a standard 1/4 —> 1/8 headphone adapter work for this purpose? or would the tip and sleeve need to be connected/shorted? That should work. It doesn't matter whether the tip and sleeve are connected. Once a second plug is inserted those two speakers are removed from the circuit. You can leave ...

Would re-wiring the PPC412 from parallel to serial (or vise versa, whatever the opposite of how its wired now / or however the regular PPC412 is wired) give me a mono 16ohm load instead of the current mono 8ohm load? or is it solely the difference in the impedance of the v30s vs the G12Ks (i haven'...

Oh and sorry for the quick double post, but would it be an option to use the left input on the PPC412HP? (and only get 2 of the 4 speakers? just to test out the blend of the two speaker types and see if i enjoy the mix?) This was one of theories I said I wouldnt mention in my first post.

brevity is the soul of wit :) Thank you for the quick response Can you (or some other helpful chap on here) just confirm/clarify something for me... This thread mentions '3/4' stacks: https://forum.orangeamps.com/viewtopic.php?t=51127 I'm going to assume this is with the PPC412 (not HP8) + PPC212 (b...

Hey guys, Been searching a lot on this forum and others to see if I can run my Dual Terror with both the PPC412HP8 and a PPC212CB. All the research I've found confirms that my brain does not understand impedance no matter how many posts I read or how many times I look at the equations and technical ...