Hi,
I have a Terror Bass with the DI output level too hot.
A lot of people complain about this in these amplifiers.
The DI output was designed for Line Level (too hot for a MIC input) and not for MIC Level as it's more convenient in concerts.
Did anyone around here modified their Terror Bass DI Output?
Attenuation can be achieve with some resistor changes.
I've heard Orange had a mod for it, but cant seem to find info anywhere, just a lot of people complaining about the same problem
Terror Bass - DI output modification
Moderator: bclaire
-
- New Member
- Posts: 5
- Joined: Tue Nov 12, 2019 4:02 am
-
- New Member
- Posts: 5
- Joined: Tue Nov 12, 2019 4:02 am
Re: Terror Bass - DI output modification
Did any of you had the amplifier modified?
-
- New Member
- Posts: 5
- Joined: Tue Nov 12, 2019 4:02 am
-
- New Member
- Posts: 5
- Joined: Tue Nov 12, 2019 4:02 am
Re: Terror Bass - DI output modification
I did receive any news from here or from Orange Technical support,
so I performed the mod with help from Groupdiy members.
It's as simple as adding 1 resistor
here is the link for the mod and info in case anyone is interested in the future:
https://groupdiy.com/index.php?topic=73 ... #msg933866
so I performed the mod with help from Groupdiy members.
It's as simple as adding 1 resistor
here is the link for the mod and info in case anyone is interested in the future:
https://groupdiy.com/index.php?topic=73 ... #msg933866
Who is online
Users browsing this forum: No registered users and 26 guests