Rockerverb Tube Switch
Moderator: bclaire
Rockerverb Tube Switch
I was thinking of trying some KT88s or 6550s in my Rockerverb. I know there's a switch on the back of the MKII so obviously I'd flip the switch to the correct setting and bias the amp. I do bias my own amps but I've never switched out tube types so are there any special steps I'd have to take?
Thunderverb 200, Rockerverb 100 MKII, OR50, Dark Terror, Friedman BE 100, JCM 800 2203
-
- Duke of Orange
- Posts: 6821
- Joined: Tue Aug 18, 2009 9:08 am
- Location: Derby, England
Re: Rockerverb Tube Switch
Just regular biasing.
Be aware that some users have reported issues trying to bias non EL34 valves using the switch as it is intended.
I would follow the switch to start with, but if it keeps you too far apart from the normal range for the vakve type you're fitting, don't be afraid to switch it back.
Be aware that some users have reported issues trying to bias non EL34 valves using the switch as it is intended.
I would follow the switch to start with, but if it keeps you too far apart from the normal range for the vakve type you're fitting, don't be afraid to switch it back.
Ant
Orange Gear: RV50 MKI, R30, AD15, PPC212
And.... Genz Benz Black Pearl 30
Past Orange: AD30TC Combo, TT, AD5
Guitars: Gibson Les Paul Standard Faded, Vigier Expert Retro 54, Gibson SG 70s Tribute, Aria Pro II RS X80, G&L ASAT Special Tribute
Orange Gear: RV50 MKI, R30, AD15, PPC212
And.... Genz Benz Black Pearl 30
Past Orange: AD30TC Combo, TT, AD5
Guitars: Gibson Les Paul Standard Faded, Vigier Expert Retro 54, Gibson SG 70s Tribute, Aria Pro II RS X80, G&L ASAT Special Tribute
Who is online
Users browsing this forum: No registered users and 12 guests